EZ Lynk Installation InstructionsUpdated 3 days ago

The EZ Lynk AutoAgent is a universal OBD communication device that allows users to monitor engine parameters, scan and clear DTC codes, read, and program their vehicle.

The device plugs directly into your vehicle’s OBD port, and all interaction is handled through the smartphone app (iOS 8+ & Android 5+). If you purchased one of the support packs with your AutoAgent, you will need to download the app and create an account.
This account will be permanently locked to the device. If you are ordering for a customer, set up the account using their email, or have them create the account and send you the login details.

After creating your account, you must link the device to your account and then link the device to your vehicle. You will gain access to the tune depository for 4 weeks with the Limited Support Pack or indefinitely with the Full Support Pack.

Instructions

1. Download the smartphone app:
   
    Download for iOS   Download for Android 
   
   
2. Open the app and create an account.
3. Turn the key to the ON/RUN position (after ACC and before START).
4. Plug the AutoAgent into your vehicle's OBD port. You should see a blue and green light illuminated.
5. Connect your phone to the AutoAgent using WiFi.
   Scan for WiFi networks and connect to the EZ Lynk_### network.
6. Open the app. If you are successfully connected to the EZ Lynk WiFi network, you should now see vehicle gauges in the app.
7. Link the AutoAgent with your vehicle.
   You must have data for this step. If you do not have cellular data, connect to WiFi and reopen the app.
   You should receive a notification to auto-link your device.
   If prompted for a technician email instead, contact [email protected].
8. Load your tune:
   Go to Menu > Vehicle > ECU Profiles.
   Your available tune options will appear. Find the tune you want, click the download button, and when finished, click Install and then Proceed.
9. Follow the on-screen instructions to complete the tuning process.

Note: If you do not have cellular data, you must disconnect from the AutoAgent WiFi to download your tune. After downloading it to your phone, reconnect to the EZ Lynk WiFi to install and flash the vehicle.