BEFORE INSTALLATION, PLEASE READ. Important: Before installing the tune file, ensure you install the patch file first. Failing to do so can corrupt the factory PCM, leading to potential issues that might require a tow to a dealership for a factory re

<section><h2 id="important-pre-installation-notes"><strong>Important Pre-Installation Notes</strong></h2><p><strong>BEFORE INSTALLATION, PLEASE READ</strong></p><ul><li><strong>PLEASE USE AT YOUR OWN RISK.</strong></li><li>These devices are for <strong>OFFROAD VEHICLES ONLY.</strong></li><li>Do not attempt to read the stock file using AutoCal. If you need a stock file, contact your dealership for a reflash.</li></ul></section><section><h4 id="support-hours-support-is-available-only-during-business-hours">Support Hours: Support is available only during business hours.</h4></section><section><h2 id="installation-steps"><strong>Installation Steps</strong></h2><ol><li>Connect the OBD2 cable to the AutoCal device.</li><li>Plug the other end into the vehicle&#x2019;s OBD2 port.</li><li>Power on the device, navigate to the Tune menu, and press Enter.</li><li>Select the Tuning option.</li><li>Choose the Program Full option.</li><li>Select the Calibration file for your AutoCal device.</li><li>Follow on-screen instructions to complete the installation.</li></ol></section><section><h2 id="special-instructions"><strong>Special</strong> <strong>Instructions</strong></h2><h3 id="for-2007-2012-cummins-trucks">For 2007-2012 Cummins Trucks:</h3><p><strong>Important:</strong> Before installing the tune file, ensure you install the patch file first. Failing to do so can corrupt the factory PCM, leading to potential issues that might require a tow to a dealership for a factory re-flash.</p><h3 id="cummins-specific-instructions"><strong>Cummins Specific Instructions:</strong></h3><ul><li>Locate the <strong>intake air throttle valve</strong> on the driver&apos;s side of the motor, underneath the intake by the intercooler pipe.</li><li>Ensure to &quot;unplug&quot; this valve. If it remains plugged, it might stick closed, causing the truck not to run correctly or rev up.</li><li>If you&apos;re unfamiliar with the location or the unplugging process, it might be a bit complicated. Consider seeking expert help if unsure.</li></ul><h3 id="duramax-specific-instructions"><strong>Duramax Specific Instructions:</strong></h3><ul><li>Before tuning, &quot;unplug&quot; the <strong>intake air throttle valve</strong> located on the passenger side of the motor, underneath the hood to the left of the Alternator.</li><li>For LML 11-16 trucks:<ul><li>Unplug <strong>both EGR Valves</strong>. You can find the first on the driver&apos;s side and the other on the passenger side of the Engine.</li><li>Also, ensure to unplug the intake air throttle valve. Not doing so can cause the truck to malfunction or not rev-up.</li></ul></li></ul></section><section><h2 id="additional-resources"><strong>Additional Resources</strong></h2><ul><li style="color: rgb(243, 121, 52);"><a class="fr-strong" href="https://help.tunerdepot.com/en-US/how-do-i-install-my-csp5dsp5-switch-254830"><u>SOTF DSP/CSP switch installation instructions</u></a></li><li><a class="fr-strong" href="#https://content.efilive.com/documents/AutoCal%20V3%20User%20Guide.pdf" rel="noopener noreferrer" target="_blank"><u>EFI LIVE AUTOCAL V3 USER GUIDE</u></a></li></ul></section><footer><section id="isPasted"><h2 id="calibration-adjustments"><strong>Calibration Adjustments</strong></h2><p>Not all trucks are the same. If the calibration on your EFILIVE AutoCal V3 isn&apos;t accurate, contact <a href="mailto:efilive@tunerdepot.com">efilive@tunerdepot.com</a> for a custom calibration with the following vehicle details:</p></section><ul><li>Year/Make/Model</li><li>Complete VIN</li><li>Transmission</li><li>Transfer Case Type: Manual or SOTF</li><li>Fuel Tank (Single or Double)</li><li>Tire Size (GM or Chevrolet only)</li><li>Modifications</li></ul><p><strong>Note:</strong> If all of the above details are not provided, we <strong>cannot process your request.</strong></p><p><br></p><p><strong>Video Link Click Here</strong></p></footer>

EFI AUTOCAL V3 Installation Instructions

Please choose the right option from the following links:. For Dodge Ram Cummins:. CSP5 Switch Installation. For GM Duramax:. DSP5 Switch Installation.

<p><span id="isPasted" style="color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Please choose the right option from the following links:</span></p><p><strong>For Dodge Ram Cummins:</strong></p><p><strong style="color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><a class="fr-strong fr-green" href="https://help.tunerdepot.com/en-US/csp5-switch-installation-312116" rel="noopener noreferrer" target="_blank" title="CSP5 Switich Installation"><span style="background: #FFAD00; border-radius: 10px;
  color: #8A3324;
  border-bottom: 5px solid #E77D22;margin: 15px 25px;
  padding: 15px 20px;
  box-shadow: 3px 3px 3px rgba(0,0,0,0.3);">CSP5 Switch Installation</span></a></strong><u><br style="color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"></u></p><p><br></p><p><strong>For GM Duramax:</strong><u><br style="color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"></u></p><p><a href="https://help.tunerdepot.com/en-US/dsp5-switch-installation-312117" rel="noopener noreferrer" target="_blank" title="DSP5 Switch Installation" class="fr-green"><span style="background: #FFAD00; border-radius: 10px;
  color: #8A3324;
  border-bottom: 5px solid #E77D22;margin: 15px 25px;
  padding: 15px 20px;
  box-shadow: 3px 3px 3px rgba(0,0,0,0.3);"><strong>DSP5 Switch Installation</strong></span></a></p><p><br></p>

How to install your CSP5/DSP5 switch

Please see the following link to install your bypass cable:. > Installing the Ram 2018+ bypass cable

<p id="isPasted" style="margin: 0px 0px 1em; line-height: 1.4; color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Please see the following link to install your bypass cable:</p><p style="margin: 0px 0px 1em; line-height: 1.4; color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><a href="https://tunerdepot.com/pages/2018-2019-2020-cummins-bypass-cable-installation" rel="noopener noreferrer" target="_blank" title="RAM 2018+ Bypass Cable Installation"><strong><u>&gt; Installing the Ram 2018+ bypass cable</u></strong></a></p>

How to install the Bypass Cable on 2018+ RAM Trucks

Steps to view Serial and Auth Code information for VIN License purchases - Tuner Depot

<div id="isPasted" style="box-sizing: inherit; color: rgb(64, 64, 64); font-family: &quot;Nunito Sans&quot;, &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><div id="isPasted" style="box-sizing: inherit; font-size: 16px; margin: 22px 0px 32px; padding-bottom: 36px; font-weight: 400; letter-spacing: 0.005em; border-bottom: 1px solid rgb(214, 214, 214); color: rgb(64, 64, 64); font-family: &quot;Nunito Sans&quot;, &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><div><h2 id="how-to-find-serial-and-auth-code-for-an-efi-live-autocal-v3-device"><span style="color: rgb(0, 0, 0);">How to Find Serial and Auth Code for an EFI Live AutoCal V3 Device?</span></h2></div><div itemprop="description"><p><span style="color: rgb(0, 0, 0);">To view<strong>&#xA0;License Status</strong> or <strong>generate Serial and Auth Code</strong> information for VIN License purchases:</span></p><ol><li><span style="color: rgb(0, 0, 0);">Connect your AutoCal device&#xA0;</span>to your PC.</li><li>Start the <a class="fr-strong" href="https://www.efilive.com/download-efilive" rel="noopener noreferrer" target="_blank"><strong><span style="color: rgb(243, 121, 52);"><u>EFILive V8 Scan and Tune application</u></span></strong></a><u>.</u></li><li>Click the <strong>F7: Licenses</strong> button in the left-hand pane.</li><li>On the <strong>F2: Hardware tab</strong>, the serial number is displayed in the Serial Number field.&#xA0;<strong>Copy the Serial Number for VIN License purchase.</strong><br><br><img src="https://attachments.gorgias.help/uploads.gorgias.io/JWE4j73NRG2ZlV9b/ACV2_Serial-min-2b60466e-4d06-4fca-941e-9ec9eb8cdd3d.webp" style="width: 518px;" class="fr-fic fr-dib"><br><br></li><li>Click the&#xA0;<strong>F3: VIN</strong> tab to display VIN License information.<br><img src="https://attachments.gorgias.help/uploads.gorgias.io/JWE4j73NRG2ZlV9b/ACV2_VIN-min-f4aae1c1-6d3a-41bb-8161-55f0ec8e6279.png" style="width: 527px;" class="fr-fic fr-dib"><br><br></li><li><strong>For VIN License purchases</strong>, click the [<strong>Generate Auth Code</strong>] button. The Authentication Code will be shown in the Auth Code field. <strong>Where the available VIN license slot count is zero, customers will be unable to order VIN Licenses until the VIN License slot limit is increased by Tuner Depot.</strong><br><img src="https://attachments.gorgias.help/uploads.gorgias.io/JWE4j73NRG2ZlV9b/AutoCal_VIN_Slots-min-c0a19016-4379-4149-b16f-a9d840fb1ff6.webp" class="fr-fic fr-dib"></li></ol><h3 id="isPasted" style="box-sizing: inherit; font-weight: 600; line-height: 1.1; font-size: 2.1rem; margin-top: 2.2rem; margin-bottom: 1.1rem; color: rgb(64, 64, 64); font-family: &quot;Nunito Sans&quot;, &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; letter-spacing: 0.08px; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">VIN License Validation Help</h3><p style="box-sizing: inherit; margin-top: 0px; margin-bottom: 1.1rem; color: rgb(64, 64, 64); font-family: &quot;Nunito Sans&quot;, &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: 0.08px; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">If the serial and auth code do not pass validation, an error code will be displayed. Error code details and VIN License validation help can be found&#xA0;<a href="https://service.efilive.com/kb/articles/validation-help" style="box-sizing: inherit; color: rgb(54, 167, 233); text-decoration: none;" target="_blank">here.</a> Customers should ensure that the information entered is EXACTLY as displayed in EFILive software.</p><ol style="box-sizing: inherit; margin-top: 0px; margin-bottom: 2.75rem; color: rgb(64, 64, 64); font-family: &quot;Nunito Sans&quot;, &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: 0.08px; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 1.1rem;">Check the software version used to generate the auth code.</li><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 1.1rem;">Check for spaces at the start/end of the code.</li><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 1.1rem;">Hyphens are essential.</li><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 1.1rem; font-weight: bold;"><strong>Serial must be either 10 or 12 characters.</strong></li><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 1.1rem; font-weight: bold;"><strong>Auth Code must be exactly 20 characters.</strong></li><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 1.1rem;">Verify quantity limit has not been exceeded.</li></ol></div></div></div>

How to Find Serial Number and Auth Code

If the Autocal’s programming procedure was interrupted (vehicle turned off, battery level low, etc.), this may have caused a corrupt PCM. Please ensure that a battery charger (minimum a steady 10amp charge) is connected to the vehicle while programmi

<p id="isPasted" style="margin: 0px 0px 1em; line-height: 1.4; color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">If the Autocal&#x2019;s programming procedure was interrupted (vehicle turned off, battery level low, etc.), this may have caused a corrupt PCM. Please ensure that a battery charger (minimum a steady 10amp charge) is connected to the vehicle while programming to ensure battery level voltage. Once this is done, you can attempt to flash the vehicle again. If a VIN error occurs within the Autocal while programming, the vehicle must be re-flashed to stock before continuing. We do not offer stock tune files, as this must be done at the dealership level.</p>

MY TRUCK TURNED OFF WHILE PROGRAMMING AND NOW IT DOES NOT START/AN ERROR KEEPS APPEARING, HOW DO I FIX THIS?

No, the tunes within the Autocal are only switchable using the supplied CSP4/CSP5/DSP5 switch at this time.

<p><span id="isPasted" style="color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;">No, the tunes within the Autocal are only switchable using the supplied CSP4/CSP5/DSP5 switch at this time.</span></p>

ARE MY TUNES SWITCHABLE WITHOUT INSTALLING THE CSP4/CSP5/DSP5 SWITCH?

EFi Live AutoCal customers may purchase additional VIN licenses to tune additional ECMs. Your AutoCal is pre-configured with and ships with one VIN license. Tuner Depot can increase the maximum VIN slot limit capacity on your device, so additional VI

I want to tune an Additional Truck with my EFi Live AutoCal - Additional VIN License

Your go-to guide for CSP5 Switch Installation. From basics to advanced techniques, our detailed articles ensure a seamless setup and optimal results.

<h2 style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;" id="csp5-switch-installation"><strong><span style="font-size: 18px;">CSP5 Switch Installation</span></strong></h2><p id="isPasted" style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Plug in the switch into the device.&#xA0;</p><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">It will start by blinking the firmware version number, a series of long and short blinks.&#xA0;</p><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Turn the key on and change the tune and it will blink the tune it just set.&#xA0;</p><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Test all the positions. If it correctly blinks the tune number in each position, then it&#x2019;s working perfectly.&#xA0;</p><blockquote><span style="font-size: 16px; color: rgb(0, 0, 0);">If it doesn&#x2019;t work in position five or in positions 3-5, you most likely only have two or four tunes and should follow the directions for moving the tabbed washer.</span></blockquote><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Once you&#x2019;ve determined it&#x2019;s working, finish installing it.</p><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Unless you have a mounting bracket, installing the switch requires the drilling of two holes, one small and one large. If you don&#x2019;t want to drill the second hole, you may cut off the anti-rotation pin, so you don&#x2019;t need the small hole.</p><hr><div style="
  background:#f5f5f5;
  border:1px solid #ddd;
  padding:12px 16px;
  font-family:Arial, sans-serif;
  font-size:14px;
  color:#333;
  border-radius:4px;"><strong style="color:#b14c4c;"><span style="font-size: 16px;">Important:</span></strong> <strong>Do not Attempt to flash your ECM with the CSPS pass-through switch plugged into your OBD II port.</strong></div><hr><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">After routing wire and before installing the switch, please use included tie wrap to secure the black jacket of the cable to the switch using the small slot in the corner of the PCB. This prevents wires from getting pulled out of the connector or the connector getting pulled free.</p><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><strong>Your switch has a nut and two washers. The smooth washer must remain on the bottom with the tab located in hole number five*. If it falls out, turn the switch fully counter clockwise and place the washer back with the pin in hole number five. Make sure the switch moves exactly four clicks clockwise. If not, turn the switch back fully counterclockwise, move the pin, and try again.</strong></p><blockquote><span style="font-size: 16px; color: rgb(0, 0, 0);">*If you have a CSP2 or CSP4 tune, follow the instructions in the previous paragraph but place the tab in hole number two or four, (instead of hole number five.)</span></blockquote><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">For 2018+ and if you use EFILive&#xAE;, you will also need a Cummins Bypass Cable to flash (and to use the CSP5 switch). And, you MAY also need it for MM3, Smarty &amp; RME if the security module fails.</p><p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 15px; color: rgb(0, 0, 0); border-left: none !important; font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><br></p>

CSP5 Switch Installation

Comprehensive guide to DSP5 Switch Installation. From unboxing to final setup, our articles provide clarity and expertise for a successful installation.

<h2 id="isPasted"><strong>Duramax DSP5 SOTF Switch Installation Instructions</strong></h2><p style="box-sizing: inherit; margin-top: 0px; margin-bottom: 15px; color: rgba(0, 0, 0, 0.75); font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">The DSP5 switch will have two wires with pre-crimped pins. It does not matter which colored wire goes into which pin as long as you use the two pins listed below:</p><ul><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 15px; color: rgba(0, 0, 0, 0.75); font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">2001-2004 LB7: Blue ECM Connector<br>Pin # 49 &amp; pin # 69</li><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 15px; color: rgba(0, 0, 0, 0.75); font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">2004.5-2005 LLY: ECM connector labeled J3<br>Pin # 32 &amp; pin # 50</li><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 15px; color: rgba(0, 0, 0, 0.75); font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">2006-2010 LBZ/LMM: ECM connector #1 (The bigger of the two)<br>Pin # 46 &amp; pin # 54</li><li style="box-sizing: inherit; margin-top: 0px; margin-bottom: 15px; color: rgba(0, 0, 0, 0.75); font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">2011-2016 LML: Gray ECM connector J3<br>Pin # 11 &amp; pin # 35</li></ul><p style="box-sizing: inherit; margin-top: 0px; margin-bottom: 15px; color: rgba(0, 0, 0, 0.75); font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">&#xA0;After you&apos;ve installed the pins into the correct connector location, plug the connector back in and turn the ignition to ON. Press the small white test button on the back of the switch, if one LED lights up you likely have the pins in the correct location. If none of the LEDs light up, check your wiring.&#xA0;</p><p style="box-sizing: inherit; margin-top: 0px; margin-bottom: 15px; color: rgba(0, 0, 0, 0.75); font-family: &quot;Harmonia Sans&quot;, sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><strong>The DSP5 switch has one nut and two washers. The smooth washer is to remain on the bottom with the tab located in hole #5. If it falls out, turn the switch fully to the left (counter clockwise) and place the washer with the pin into hole #5. Make sure the switch moves exactly 4 positions to the right (clockwise), if not loosen the nut and reposition the pin.</strong></p><p><strong>Please note:</strong></p><ul style="list-style-type: circle;"><li style="font-weight: bold; font-style: italic;"><em><strong>Do not cut a pin off a wire and ground it</strong></em></li><li style="font-weight: bold; font-style: italic;"><em><strong>Loosen the set screw before installing the knob onto the switch</strong></em></li><li style="font-weight: bold; font-style: italic;"><em><strong>Note: square or rectangular pins only go in one way &#x2013;&#x2013; &#xA0;don&apos;t force it. If it&apos;s not going in, it&apos;s likely not orientated the correct way.</strong></em></li></ul>

DSP5 Switch Installation

There will be one tune file on your Autocal device per order. Within the tune file, there will either be 4 or 5 switchable tunes using your supplied CSP4/CSP5/DSP5 switch. Each tune created for each Autocal device sold is for one specific vehicle. Pl

<p><span id="isPasted" style="color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;">There will be one tune file on your Autocal device per order. Within the tune file, there will either be 4 or 5 switchable tunes using your supplied CSP4/CSP5/DSP5 switch.</span></p><p><span style="color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;">Each tune created for each Autocal device sold is for one specific vehicle. Please contact&#xA0;</span><a href="mailto://support@blackbandit.ca%20" style="font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;"><strong><u>support@blackbandit.ca&#xA0;</u></strong></a><span style="color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;">if you want to tune multiple vehicles with your Autocal device with additional VIN licenses and tune files for each specific vehicle.</span></p>

HOW MANY TUNES ARE ON MY AUTOCAL DEVICE, AND CAN I USE THE TUNE FILE ON MULTIPLE VEHICLES

If error $053E appears while programming your vehicle, it means the VIN you have submitted with your order does not match the vehicle’s VIN that you are trying to program with your Autocal. Please ensure that the VIN you submit for your order of your

<p id="isPasted" style="margin: 0px 0px 1em; line-height: 1.4; color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">If <strong>error $053E</strong> appears while programming your vehicle, it means <strong>the VIN you have submitted with your order does not match the vehicle&#x2019;s VIN that you are trying to program with your Autocal</strong>. Please ensure that the VIN you submit for your order of your Autocal matches the VIN of the vehicle you are trying to program. A new tune (in .bbx file format) will need to be made and submitted to you in order to fix this issue. You will be required to upload the new tune to your Autocal following the instructions below:</p><h3 style="margin: 0px 0px 1em; line-height: 1.4; color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;" id="program-quick-setup">Program Quick Setup</h3><p style="margin: 0px 0px 1em; line-height: 1.4; color: rgb(0, 0, 0); font-family: &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">The Quick Setup is the quickest and easiest way to program all files required to make AutoCal functional.<br><br>The data that is copied into the quick setup file includes:<br>The device settings.<br>&#xB7; The current Options.txt file which contains the controllers and PID selections.<br>&#xB7; All required supporting configuration files (*.obj, *.pmm, *.bix and *.dtc).<br>&#xB7; Up to 5 *.ctz and/or *.coz tune files.<br><br>This method requires your tuner to send you a *.bbx quick setup file via email.<br><br>1. Save the *.bbx file your tuner sent to the folder: \Documents\EFILive\V8\BBX<br>2. Connect AutoCal to your PC and open V8 Scan and Tune software.<br>3. Navigate in the V8 software to [F5: BBX]-[F6: Quick Setup]<br>4. Select [Open Quick Setup] and navigate to the directory and select the *.bbx file your tuner sent you.<br>5. Do not modify any of the settings defined by your tuner unless they request you to.<br>6. Select [Program Quick Setup] to program device settings, controller configuration and tune files to your AutoCal.</p>

WHY IS ERROR CODE $053E APPEARING ON THE AUTOCAL?

You can only contact tech support via email.

Go Back to Tuner Depot

Tuner Depot

Discover answers to frequently asked questions (FAQs) about the EFI Live Auto Cal device. Get information on its features, compatibility, installation process, and troubleshooting tips. Find expert advice and guidance to optimize your truck.

EFI Live Auto Cal - FAQ